So, I thought I would post a bit of a tutorial on how to make your very own Team Skull Outfit!
What you will need:
24X24 or 27X27 Piece of black fabric.
2 sets of 6 inch Black Fabric (6 inch may not fit everyone. Probably should measure arm)
Plain Black Tank-Top
Roll of White Electrical Tape (Thin)
Generic White Bennie (3 dollar ones at target are good)
Black Fabric Paint
(Better to buy a real necklace online rather than make one.)
First, with the 24X24 or 27X27 Piece of fabric, run White Electrical on the Top side of the Bandana. Then Push down both sides onto the fabric. Then both sides should be covered in a thin piece of white electrical tape. Then Tie the Bandana in a triangle fashion. Wrap it around your face and mark on the White electrical tape right where the nose begins to make the fabric curve. Then with small pieces of electrical tape, put them over the mark and let them hang off around one-half of an inch.
Tank Tops is simple. Simply make an X using the electrical tape.
With the two small pieces of black fabric, run the electrical tape around both the top and bottom and fold them down to be on both sides on the cuff. To keep it to stay together, link together both sides and run electrical tape down to keep it together.
On the front of the Beanie, Create one Circle and one Cresent in the same fashion as the team skull hat. Then Proceed to fill it in with Fabric Paint.
Let the Beanie dry, and there you have it! You got yourself a Team Skull Outfit!
What you will need:
24X24 or 27X27 Piece of black fabric.
2 sets of 6 inch Black Fabric (6 inch may not fit everyone. Probably should measure arm)
Plain Black Tank-Top
Roll of White Electrical Tape (Thin)
Generic White Bennie (3 dollar ones at target are good)
Black Fabric Paint
(Better to buy a real necklace online rather than make one.)
First, with the 24X24 or 27X27 Piece of fabric, run White Electrical on the Top side of the Bandana. Then Push down both sides onto the fabric. Then both sides should be covered in a thin piece of white electrical tape. Then Tie the Bandana in a triangle fashion. Wrap it around your face and mark on the White electrical tape right where the nose begins to make the fabric curve. Then with small pieces of electrical tape, put them over the mark and let them hang off around one-half of an inch.
Tank Tops is simple. Simply make an X using the electrical tape.
With the two small pieces of black fabric, run the electrical tape around both the top and bottom and fold them down to be on both sides on the cuff. To keep it to stay together, link together both sides and run electrical tape down to keep it together.
On the front of the Beanie, Create one Circle and one Cresent in the same fashion as the team skull hat. Then Proceed to fill it in with Fabric Paint.
Let the Beanie dry, and there you have it! You got yourself a Team Skull Outfit!